The carefully engineered design M22520 achieves the absolute maximum mechanical advantage and the tool's light weight helps minimize operator fatigue.
A permanent dataplate is affixed to all turretheads and positioners. This plate lists specific contact part numbers, the corresponding position color code (for 3 position turret heads), and suggested selector depth settings for the wire size being used.
The adjustable head (P/N UH2-5) is ideally suited for lab work and prototype production applications. This M22520 head is attached in the same manner as explained above.
The selected contact is inserted through the entry hole M22520 on the opposite side M22520 of the tool frame from the head. The height adjusting screw is then rotated until the contact is in the proper position for crimping. The screw can be secured with the locknut provided. Some testing will be necessary to determine the optimum selector setting for your contact/wire combination.
The selected contact is inserted through the entry hole M22520 on the opposite side M22520 of the tool frame from the head. The height adjusting screw is then rotated until the contact is in the proper position for crimping. The screw can be secured with the locknut provided. Some testing will be necessary to determine the optimum selector setting for your contact/wire combination.
The M22520 is approximately 93⁄4" x 21⁄2" x 11⁄4" and weighs 15 oz..Other than keeping the unit clean and properly stored when not in service, no operator maintenance is required. Precise Tool offers cprecisetoolomplete factory service by knowledgeable technicians within a reasonable turnaround time. Complete M22520 instructions concerning the use, care and warranty are supplied with each tool.Additional copies are available on request.
Pneumatic versions of this tool can be found here.
The Battery Powered versions of this tool can be found here.
A permanent dataplate is affixed to all turretprecisetool heads and positioners. This plate lists specific contact part numbers, the corresponding position color code (for 3 position turret heads), and suggested selector depth settings for the wire size being used.
The adjustable head (P/N UH2-5) is ideally suited for labwork and prototype production applications. This M22520 head is attached in the same manner as explained above. The selected contact is inserted through the entry hole M22520 on the opposite side M22520 of the tool frame from the head. The height adjusting screw is then rotated until the contact is in the proper position for crimping. The screw can be secured with the locknut provided. some testing will be necessary to determine the optimum selector setting for your contact/wire combination.
The M22520 is approximately 93⁄4" x 21⁄2" x 11⁄4" and weighs 15 oz..
Other than keeping the unit clean and properly stored when not in service, no operator maintenance is required. Precise Tool offers complete factory service by knowledgeable technicians within a reasonable turnaround time. Complete M22520 instructions concerning the use, care and warranty are supplied with each tool.Additional copies are available on request.
Pneumatic versions of this tool can be found here.
Follow us on Linkedin: https://www.linkedin.com/in/m22520
Pinterest: https://jp.pinterest.com/precisetool/
No comments:
Post a Comment